motor

Hey folks, I thought i share my current project im working on. I stripped my thread in my Insert last weekend. So I made a new one and changed the M3 mounting holes to fit an M4 Screw. Made of 7075 t6 as always.

Can any one shed some light on the difference between a 1700 and a 2200 kv motor. This mt 410 is my first ground up build and not sure what type of kv is needed. Will or can run a 15 to 17 t pinion and tires will most likely be banlands or shockwaves. Any suggestions will be appreciated. Thanks

Hi, this is my first 4wd shortcourse truck. I bought a 410.3 used and it came with a Maclan motor. I put my other electronics in including a MMP. When I pull the throttle, it goes in reverse. I tried to reverse it on the tx, but then it just goes faster in reverse. Put the controller back to...

So I'm building my MT410 now but still need an ESC and motor. I live in Ohio so I have snow and will run it in the winter waterproof is a must im looking at the mamba monster. I'm new to electric and don't know if i was want the 1700kv or 2200 speed and standing backflips not needed don't want...

I have a problem, on my second outing with my mt410 the housing on my arrma blx 4075 2000kv motor breaks where the 4 screws holding the end cap are. Basically the material where the screw goes through breaks off at the skinny part towards the front of the housing. It was brand new so I called...

What are you guys running for motor/esc combos ? And what do you guys like most about the current setups ?