dragonwhyr
Member
- Messages
- 11
- Reaction score
- 3
I may not have any luck, but for starters please only people who have this setup...
Spektrum dx5c or equivalent (rugged, pro)
Spektrum Sr6100at receiver or equivalent.
Castle mamba monster x8s esc with 1520 1650kv motor
I've built my mt410, but still need electronics...I know I want mmx8s 1520 combo, but have heard about issues with initial setup, calibration, and startup between spektrum and castle products.. then there are those who said they had no problems.. even castle themselves had to post in a faq page about this... question 28 here>> http://support.castlecreations.com/mamba-monster-x-8s-faq. However some of the wording in their solution confuses me..
So if you have this setup, please take the time to help me out and answer some questions..
What was your experience like setting these two products up together? Binding, calibration between tx/rx, calibration between tx/esc?
Some talked about the length of time between powering everything on and it initializing for you to take control... is this a thing? Is this what Castle was saying is solved by hitting the throttle during amber light so the esc will initialize?
If you had issues but the Castle solution helped you, can you please help me understand it?
If you had zero issues I'd like to talk to you about your process as well..
I do hope to find at least one person familiar with this setup who can help me.. tyia
Spektrum dx5c or equivalent (rugged, pro)
Spektrum Sr6100at receiver or equivalent.
Castle mamba monster x8s esc with 1520 1650kv motor
I've built my mt410, but still need electronics...I know I want mmx8s 1520 combo, but have heard about issues with initial setup, calibration, and startup between spektrum and castle products.. then there are those who said they had no problems.. even castle themselves had to post in a faq page about this... question 28 here>> http://support.castlecreations.com/mamba-monster-x-8s-faq. However some of the wording in their solution confuses me..
So if you have this setup, please take the time to help me out and answer some questions..
What was your experience like setting these two products up together? Binding, calibration between tx/rx, calibration between tx/esc?
Some talked about the length of time between powering everything on and it initializing for you to take control... is this a thing? Is this what Castle was saying is solved by hitting the throttle during amber light so the esc will initialize?
If you had issues but the Castle solution helped you, can you please help me understand it?
If you had zero issues I'd like to talk to you about your process as well..
I do hope to find at least one person familiar with this setup who can help me.. tyia