410 2.0 what body are u using sct410 2.0

[obessedwithrc]

Is this thier SHORT COURSE SUPER STRONG CLEAR RC CAR BODY - SC001??
Also what thickness did you get? I see 1, 1.5, & 2mm

If so it says the wheelbase is 325mm xx 310mm (width), did you have any issues fitting yours?

I'm really thinking about getting the SCT410 2.0 for a rally car build. Delta Plastiks have a SUBARU WRX 22b 1/8 SCALE GT CLEAR RC CAR BODY - 0108 with the same wheelbase and width, but I wasn't sure if the SCT410 wheelbase would match (amain says 329).
View attachment 11532

Anyone think I might have issue running WR8 rally wheels?
View attachment 11533I did see a 17mm conversion for putting 1/8 wheels on. I can see some 1/8 GT tires that are 100mm if the WR8 are to small

Regarding the wheelbase, you can move the wheelbase shims to the rear. This would reduce the wheelbase by 3mm. So, instead of 329, the wheelbase would be 326. My guess is that you wouldn't have any issues here.

Regarding the track width and the width of the body, I don't see any issues there.

The wheels are where you are going to have issues. A standard short course wheel (not the tire) inside diameter is 3 inches. For a standard short course truck, the inside diameter of the tire is tall enough to clear the height of both the front and rear hubs.

I recently tried to transform the tekno 1/8 buggy into a 1/10 short course truck and the inside diameter of a short course truck tire isn't large enough to fit over the front c-hubs.

That said, I was able to fit the Rlaarlo XTS-10 rally car tires to my SCT410SL. If you're gonna use a rally body for a short course truck, look up the wheelbase and track width for the SCT410SL.

If you have other 1/10 rigs, you can always order the rally tires first, see if they fit your SCT410 2.0, and if they do, then order the body and shift the wheelbase forward by 3mm.

 

[headsmell]

Regarding the wheelbase, you can move the wheelbase shims to the rear. This would reduce the wheelbase by 3mm. So, instead of 329, the wheelbase would be 326. My guess is that you wouldn't have any issues here.

View attachment 11534

Regarding the track width and the width of the body, I don't see any issues there.

The wheels are where you are going to have issues. A standard short course wheel (not the tire) inside diameter is 3 inches. For a standard short course truck, the inside diameter of the tire is tall enough to clear the height of both the front and rear hubs.

I recently tried to transform the tekno 1/8 buggy into a 1/10 short course truck and the inside diameter of a short course truck tire isn't large enough to fit over the front c-hubs.

That said, I was able to fit the Rlaarlo XTS-10 rally car tires to my SCT410SL. If you're gonna use a rally body for a short course truck, look up the wheelbase and track width for the SCT410SL.

If you have other 1/10 rigs, you can always order the rally tires first, see if they fit your SCT410 2.0, and if they do, then order the body and shift the wheelbase forward by 3mm.

Ah great I forgot about the shims! That will help sit the tire for sure.

Cheers, yeah I'm already looking at jumping straight with the TKR5570-17 – 17mm Hub Adapter Set, so I can run some 1/8 tires I already have around. Good to know there are a few options. My feeling with the body is maybe 1/8 tires are need, as 1/10 might look to smallish

 

[Houdini]

Is this thier SHORT COURSE SUPER STRONG CLEAR RC CAR BODY - SC001??
Also what thickness did you get? I see 1, 1.5, & 2mm

If so it says the wheelbase is 325mm xx 310mm (width), did you have any issues fitting yours?

I'm really thinking about getting the SCT410 2.0 for a rally car build. Delta Plastiks have a SUBARU WRX 22b 1/8 SCALE GT CLEAR RC CAR BODY - 0108 with the same wheelbase and width, but I wasn't sure if the SCT410 wheelbase would match (amain says 329).
View attachment 11532

Anyone think I might have issue running WR8 rally wheels?
View attachment 11533I did see a 17mm conversion for putting 1/8 wheels on. I can see some 1/8 GT tires that are 100mm if the WR8 are to small

Headsmell, yes this is the SC001 and it is the 2mm version. No issues fitting this body on a 410.3. The body is unbelieveably strong.

 

[NateNalley89]

Jcon high flow

 

[YinYang]

I have the same body on mine, and i think the wheelbase is a touch too short on the body, maybe 6mm. I had to do some creative trimming to the fenders to make it look ok. Also wont really fit anything but the tekno/scte offset wheels at the height i have it mounted. My +3 wheels rub badly.

View attachment 10213

View attachment 10214

FYI someone is using these images to try to scam on Facebook.

 

[Andrew Oster]

Which ”unbreakable” body would be the best fit with the standard SCT410 2.0 body mounts? Preferably something with open wheel wells, i.e. monster or baja bug style.

There’s this bloke called Christian Tschuschke making bodies that seem very popular among the German-speaking hobbyists, but it doesn’t look like any of his are a drop-in solution for the SCT.

 

[nino.]

Check out TMT bodies. They're ugly but they're tough. Couple of models available. White or black. Can't paint them, can't use stickers.
I tried contacting Tschtchchhthkegrmblfgke a year or two ago about SCT bodies but no reply.