MT48 2.0 Body Ideas

[Acontisr]

Just wondering some bodies people are going with on there truck.

 

[Germanrcplayground]

Proline C10 Longbed, Chevy Silverrado, Pick Up, Gladiator for SC

 

[thewanted]

I’ll be using this one.

https://www.basherbodies.com/product/7081175/monster-maxx

 

[Kyõsuke]

This one for me.
https://www.basherbodies.com/product/10087658/raptor

 

[RC Steve]

My experience with my MT410 V1 is Proline and Jconcepts bodies are good for one battery pack. With my new MT48 I went with an Unbreakable body from TorreshopDesign off of the Etsy site. A rip off of a Proline Megalodon SCT. If you go the Unbreakable route do not buy directly from ProBodyRC they're an off/on burn site, buy from his partner at TorreshopDesign. He's slow but dependable.

 

[RustyUs]

My experience with my MT410 V1 is Proline and Jconcepts bodies are good for one battery pack. With my new MT48 I went with an Unbreakable body from TorreshopDesign off of the Etsy site. A rip off of a Proline Megalodon SCT. If you go the Unbreakable route do not buy directly from ProBodyRC they're an off/on burn site, buy from his partner at TorreshopDesign. He's slow but dependable.

I can't wait to see a "Megalodon"-ish body on the chassis. Sweet!

 

[FDCF]

This one for me.
https://www.basherbodies.com/product/10087658/raptor

I know you own the kkpit Kpm. For you which is better quality and durability : MT48 or KPM? What electronics are you using and body on your KPM. Thanks

 

[Nicochau]

Proline does amazing bash armor bodies, way better than the probodyrc trash.

 

[RCFinger]

Proline does amazing bash armor bodies, way better than the probodyrc trash.

You got a link or model number? I can only find 1/5 scale bodies.

 

[Kyõsuke]

I know you own the kkpit Kpm. For you which is better quality and durability : MT48 or KPM? What electronics are you using and body on your KPM. Thanks

Hello, yes i have the KPM, but not the MT48 for now, so i can't directly compare this two. But i have the MT410 v1, the SCT410.3 and the ET48 2.0, so i can compare the quality of the two brand. The aluminium of both the brand is good, but everything look bigger on the KPM, it look more robust, even if the Tekno is already almost unbrekable. Plastic look the same too. The kit instruction is a lot better on the Tekno, but if you are used to build kit, it's not complicated.
On all my Tekno car, i use 4282 motor with Max8.
On the KPM, is use 4985 1250kv motor with Max6, so i can use 8s.
I use a Basherbodies body on my KPM.
I make 3d printed parts to put the batterie inside, use SC bumper, and put the radio box inside.
And i buy some upgrade to remove the yellow parts that i hate xD (i use XRT spring).

I think this body can work on the MT48.

 

[thewanted]

Hey @Kyõsuke. Which body is that? I've tried to find it on basherbodies.com but I'm struggling.

 

[Kyõsuke]

https://www.basherbodies.com/product/15135099/f100

 

[thewanted]

https://www.basherbodies.com/product/15135099/f100

Thanks very much! I love the look but it's *really* long! Far longer than the other bodies which are under their "For Tekno" section. Would be interesting to see if it fits because the wheelbase is about 30mm longer than the MT48 2.0.

 

[Kyõsuke]

MT410 have almost the same Wheelbase as the MT48 2.0.
Here you can see the Basherbodies Maxx V1, V2 and F100 bodies on my MT410 v1.

Wheelbase of the F100 is not bad, just the back maybe a little too long, or need to make a 3D printed part to move the bumper back a little.

 

[thewanted]

Thanks! I do think that the F100 is too long, but damn it has a cool look to it.

Which front body mount did you use to get the Maxx v1 to fit?

 

[Kyõsuke]

I make 3D printed pieces.

 

[FDCF]

Hello, yes i have the KPM, but not the MT48 for now, so i can't directly compare this two. But i have the MT410 v1, the SCT410.3 and the ET48 2.0, so i can compare the quality of the two brand. The aluminium of both the brand is good, but everything look bigger on the KPM, it look more robust, even if the Tekno is already almost unbrekable. Plastic look the same too. The kit instruction is a lot better on the Tekno, but if you are used to build kit, it's not complicated.
On all my Tekno car, i use 4282 motor with Max8.
On the KPM, is use 4985 1250kv motor with Max6, so i can use 8s.
I use a Basherbodies body on my KPM.
I make 3d printed parts to put the batterie inside, use SC bumper, and put the radio box inside.
And i buy some upgrade to remove the yellow parts that i hate xD (i use XRT spring).

I think this body can work on the MT48.

View attachment 11180

View attachment 11181

View attachment 11184

View attachment 11185

View attachment 11186

View attachment 11187

You did a fantastic job, you finally convinced me: I'll purchase the kpm first

 

[Kyõsuke]

You did a fantastic job, you finally convinced me: I'll purchase the kpm first

Both are great. KPM look more than a real Monster Truck and the MT48 look more than a with Monster Truck wheels and body. I think MT48 handle is better because he is larger and lower. KPM is high, so you have to pay more attention to driving. It's not better or worse, it's an other style.

 

[FDCF]

Both are great. KPM look more than a real Monster Truck and the MT48 look more than a with Monster Truck wheels and body. I think MT48 handle is better because he is larger and lower. KPM is high, so you have to pay more attention to driving. It's not better or worse, it's an other style.

Could you please do me a favor: post pictures of the kpm and mt410 together to give me an idea of the size of the kpm

 

[Kyõsuke]

Yes. 6S Dboots on the KPM, 4s Dboots on the Tekno. KPM is 7.2kg, MT410 is 4.7kg.