cordell12
Well-known member
edit...seller knows and fixing...
I guess this is the best section for this post.
Recently a lot of us on a Facebook group have purchased an Aluminum Steering Top Plate for the Tekno RC's. This batch was milled improperly, and the holes for the steering posts are too deep. When tightened down, you have no steering it just locks up.
One may be able to add washers into the holes to make up for the deep mill, but for $30 I feel that is not the correct solution.
I guess this is the best section for this post.
Recently a lot of us on a Facebook group have purchased an Aluminum Steering Top Plate for the Tekno RC's. This batch was milled improperly, and the holes for the steering posts are too deep. When tightened down, you have no steering it just locks up.
One may be able to add washers into the holes to make up for the deep mill, but for $30 I feel that is not the correct solution.
Last edited: