• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

Mt410 1600kv HobbyStar MambaMonster x esc and a whole of custom parts post picks when i can NEW to this cant wait C10 Long bed Body!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Messages
13
Reaction score
7
Mt410.jpg
Mt410.jpg
 
just a few more parts and paint and xxx main comic book glue (most amazing thing i ever seen and cheap check them out you can put comic book or any meterial like that as a picture on the body b4 painting how crazy !@!! oh and 18t tekno pinion and some Dboots Back-flip tires.
 
Last edited:
just a few more parts and paint and xxx main comic book glue (most amazing thing i ever seen and cheap check them out you can put comic book or any meterial like that as a picture on the body b4 painting how crazy !@!!
Can’t wait to see how it comes out
 
Part 1 the diffs :) lol all with no powertools that plastic is hard as a rock my hand is blistering lol loving it tho
Diffs step 1.jpg
 
no 1600kv motor had to go with the 2000kv motor the other would not fit
c 3.jpg
c 5.jpg
Rc4.jpg
c 3.jpg
c 5.jpg
Rc4.jpg
Rc 2.jpg
c 3.jpg
c 5.jpg
Rc4.jpg
Rc 2.jpg
 
now to get the external bec installed after i get to run it to see if the momba monster x esc can handel the savox coreless high voltage servo and 2 Yeah Racing fans just too wet outside to test
 
now to get the external bec installed after i get to run it to see if the momba monster x esc can handel the savox coreless high voltage servo and 2 Yeah Racing fans just too wet outside to test
The cap should help. Savox and MMX don’t play well together.
 
I've only run mine about 5 times, but I have not had any issues with my MMX and Savox 1270 playing together. Not sure if the fans will push it over the limit or not.
 
I am interested to hear if the fans are enough to keep the 2000kv motor cool with an 18t pinion and the backflips.
 
It can always give it a go and check the temp of the motor. I ran a Hobbystar 4092 motor with those fans with a 19t pinion and the motor ran cool. I’m assuming the 76 mm motor will be a bit hotter.
 
Is that the 4076 hobbystar that did not fit? I was considering going with a 4076 1600kv and I have max 8 or monster x I can use with it but wasn't sure if It would fit. Currently Im using the arrma 2050kv 4074 and it has just a few mm of space so it would be tight
 
just a few more parts and paint and xxx main comic book glue (most amazing thing i ever seen and cheap check them out you can put comic book or any meterial like that as a picture on the body b4 painting how crazy !@!! oh and 18t tekno pinion and some Dboots Back-flip tires.
Can you elaborate a bit on that xxx main glue? I’m thinking on a project and that just might work. Do you have Picts and process suggestions. Thanks
 
Is that the 4076 hobbystar that did not fit? I was considering going with a 4076 1600kv and I have max 8 or monster x I can use with it but wasn't sure if It would fit. Currently Im using the arrma 2050kv 4074 and it has just a few mm of space so it would be tight
it didnt fit in mine was 1/2 inch too long and i dont want to move the ESC so i went this the 2000kv only gonna run it on 4s
 
the Yeah Racing fan mount would only allow as small as an 18t pinion anything smaller and it wouldn't mesh right
 
Can you elaborate a bit on that xxx main glue? I’m thinking on a project and that just might work. Do you have Picts and process suggestions. Thanks
Found it. Looks like good stuff.
 
Is that the 4076 hobbystar that did not fit? I was considering going with a 4076 1600kv and I have max 8 or monster x I can use with it but wasn't sure if It would fit. Currently Im using the arrma 2050kv 4074 and it has just a few mm of space so it would be tight
my 1600kv motor didnt work well it didnt fit unless u install the esc sideways then it fits
 
Is that the 4076 hobbystar that did not fit? I was considering going with a 4076 1600kv and I have max 8 or monster x I can use with it but wasn't sure if It would fit. Currently Im using the arrma 2050kv 4074 and it has just a few mm of space so it would be tight
i did get it to fit but now i have the max 6 and m2c chassis loving it :) now for cvd axles or maybe do the arrma conversion
 

Recent Popular Liked

Back
Top