410 2.0 What parts are needed to convert a MT410 2.0 to a SCT 410 2.0

[carolinacraftsman]

What's parts are needed to convert the MT410 2.0 into a SCT410 2.0? In the official Tekno description it says only a few parts are needed for this conversion.

 

[WoodiE]

Taking a quick glance at the parts list of each of the Tekno RC's, it looks like the following parts are needed to go from the Tekno MT410 2.0 to a SCT410 2.0.

• Chassis: TKR9508 - Chassis (4mm, black ano, SCT410 2.0)
• Driveshaft: TKR9191 - Tapered Driveshaft (center, front, 7075, black ano, EB/ET48 2.0)
• Mud Guard & Battery Tray: TKR9525L/R - Mud Guard, Battery Tray, RX Box (SCT410 2.0)
• Body Mount: TKR9598 - Body Mount Base Set (SCT410 2.0)
• Nerf Bars: TKR9583 - Nerf Bars (SCT410 2.0, L/R)
• Air Control Guards: TKR9584 - Air Control Guards (SCT410 2.0, left, right)
• Chassis/Shock Tower Brace: TKR9585 - Chassis/Shock Tower Brace (SCT410 2.0)

Did I miss anything @Matthew_Armeni?

 

[Matthew_Armeni]

Taking a quick glance at the parts list of each of the Tekno RC's, it looks like the following parts are needed to go from the Tekno MT410 2.0 to a SCT410 2.0.

• Chassis: TKR9508 - Chassis (4mm, black ano, SCT410 2.0)
• Driveshaft: TKR9191 - Tapered Driveshaft (center, front, 7075, black ano, EB/ET48 2.0)
• Mud Guard & Battery Tray: TKR9525L/R - Mud Guard, Battery Tray, RX Box (SCT410 2.0)
• Body Mount: TKR9598 - Body Mount Base Set (SCT410 2.0)
• Nerf Bars: TKR9583 - Nerf Bars (SCT410 2.0, L/R)
• Air Control Guards: TKR9584 - Air Control Guards (SCT410 2.0, left, right)
• Chassis/Shock Tower Brace: TKR9585 - Chassis/Shock Tower Brace (SCT410 2.0)

Did I miss anything @Matthew_Armeni?

You will also need the rear center driveshaft - TKR9095 and another diff output cup - TKR9114HD. Although not needed, I would also suggest the -4 bulkhead for the rear - TKR9218.
You don't actually need the SC mudguards, nerf bars, air control guards, or the long center brace to get your MT to turn into a SC.

 

[carolinacraftsman]

Thanks for the input. How about the motor mount? Does the pinion need to be bigger than 16t?

 

[RustyUs]

Thanks for the input. How about the motor mount? Does the pinion need to be bigger than 16t?

That will depend on your choice of motor, battery, and size of track/running environment. My backyard track is 90 x 100'. I run a 2S LiPo, 4000kv motor with a 16T pinion gear... I think it's great. I barely get to open the thing up.

 

[Rocketman005]

Can anyone help me with the opposite, converting my SCT 2.0 to the MT 2.0? Mainly just want the shorter wheelbase so I can do flips/stunts.

 

[RustyUs]

Can anyone help me with the opposite, converting my SCT 2.0 to the MT 2.0? Mainly just want the shorter wheelbase so I can do flips/stunts.

It would be pretty much a chassis, side guards, motor mount, bumpers, and center diff outdrive dogs bone needed.

 

[Rocketman005]

It would be pretty much a chassis, side guards, motor mount, bumpers, and center diff outdrive dog bone needed.

Awesome, thanks for the info. Just to confirm, is this the outdrive needed? Thanks

 

[RustyUs]

Awesome, thanks for the info. Just to confirm, is this the outdrive needed? Thanks

View attachment 11226

Yes, and TKR9591

 

[Matthew_Armeni]

You will also need the 0 diff height bulkhead for the rear, TKR9217.

 

[Rocketman005]

Thanks guys, that’s really helpful.