• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

T-bone Racing T2T Upper Chassis Brace vs M2C Braces

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

MailManX

Well-known member
Messages
66
Reaction score
45
Location
San Diego, CA (USA)
Tekno RC's
  1. ET48
  2. MT410
I am intrigued by the T2T (Tower-to-Tower) Upper Chassis Brace that is now being sold by T-Bone Racing, part number 57033.

https://tboneracing.net/products/57033-tbr-t2t-upper-chassis-brace-tekno-mt410

Can any of you tell me if the T2T brace is compatible to be used in addition to the following M2C braces that I already have?
#6760 MT410 Front Upper Shock Tower Brace
#6761 MT410 Rear Shock Tower Brace
#6905 MT410 Aluminum Solid Center Brace
#6755 Rear Center Brace (short)
 
I don't see 6761 MT410 Rear Shock Tower Brace on m2c website anymore. I think the center brace 6905 and 6755 short rear brace would be ok. I think anything that changes/widens the shock towers will pose a problem. I don't own the tower to tower brace though so not 100% sure. Facebook mt410 owners group also had some discussion on this subject I believe.
 
I have the t bone brace on the way and the tower braces from a main , I'll let folks no how it goes
 
I had t2t braces once.... I kept destroying diff cases/bulkheads. If you have a strong chassis/shock towers, no need. Mitch@M2C says to remove them on all arrma chassis from him. Once I removed them I stopped breaking cases. I have a mt410 that I got every brace m2c makes on the way. If i bend the chassis I will get one of his. His work and customer service is top notch.
 
Old thread here but a little info i have both the t bone t2t and all the m2c braces i haven't had much test time with the t bone t2t but so far its been great and it still has some give to save diff cases and also the go big rear tower brace is not compatible with the t2t t bone. I currently removed all my m2c braces to test the t2t because i kept busting the center brace so i wanted to see how the t2t holds up also i jump my tekno 30+ ft out of half pipes and land solid on concrete so that can explain my brace problem lol. But m2c products and services for warranty or anything is outstanding mitch is a great dude. And i ran the m2c braces for about 8 months solid stuff keeps everything in tact never bent a chassis even after i learned the front brace was broken
 
So you managed to break the m2c center brace? I have the mega brace along with the m2c chassis.

It will be interesting to hear how well your T-bone t2t brace holds up. That would save a lot of $$ over all the alum upgrades.
 
Old thread here but a little info i have both the t bone t2t and all the m2c braces i haven't had much test time with the t bone t2t but so far its been great and it still has some give to save diff cases and also the go big rear tower brace is not compatible with the t2t t bone. I currently removed all my m2c braces to test the t2t because i kept busting the center brace so i wanted to see how the t2t holds up also i jump my tekno 30+ ft out of half pipes and land solid on concrete so that can explain my brace problem lol. But m2c products and services for warranty or anything is outstanding mitch is a great dude. And i ran the m2c braces for about 8 months solid stuff keeps everything in tact never bent a chassis even after i learned the front brace was broken

is it the m2c6905 v1 that you broke?

C05F411F-F8AB-4D59-BAFE-2A2BF0E7028C.jpeg
 

Recent Popular Liked

Back
Top