Ferrebee88
Well-known member
- Messages
- 198
- Reaction score
- 174
Picked up all the parts. So far I electronics and battery trays swapped out. I'll start with the front end and rebuild the shocks while I'm at it.
-
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
410.3 Well, time to convert this SCT410.3 into a EB48SL
- Thread starter Ferrebee88
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
Ferrebee88
Well-known member
- Messages
- 198
- Reaction score
- 174
- Thread starter
- #2
I am going to put green springs in the front with 35wt shock oil. For the rear I'll be using orange springs with 30wt oil.
Figured it would be a good starting point. Will be running on smaller indoor smooth clay track.
Figured it would be a good starting point. Will be running on smaller indoor smooth clay track.
Ferrebee88
Well-known member
- Messages
- 198
- Reaction score
- 174
- Thread starter
- #3
Yup... I should have ordered thevlow profile wing mount... that thing is high!
Up, up, and away. It looks great. 
Ferrebee88
Well-known member
- Messages
- 198
- Reaction score
- 174
- Thread starter
- #5
Not too shabby!
What stub axles did you use?
Ferrebee88
Well-known member
- Messages
- 198
- Reaction score
- 174
Similar threads
