My son and I are getting out of the hobby unfortunately. He is turning 16 and has no interest in RC currently and so I have no need to do the same. We are selling his Tekno ET48 2.2 first and I will try selling this on the forum first. It is a fully built RTR truggy in very good condition. He hardly used this, never abused it, and we equipped this truggy with robust protection that has preserved it’s condition well. The build thread can be located here. https://www.teknoforums.com/threads/new-to-forum-with-tekno-mt410-et48-2-2-et410-2.3434/#post-26663
Other relevant threads with pictures of this car and other Tekno cars yet to be listed. https://www.rctalk.com/forum/threads/my-losi-lmt-build-modification-thread.134536/#post-1510145
My son made a list of the most important parts included in the sale of the car below. He is asking for $750 for the kit including shipping (lower 48) and for an extra $35, I can add an SMC 5800 MaH LIHV 4s 15.2V battery. Note, this car could be run on 6s but we HIGHLY recommend that you NEVER do that. We have never run it on 6s, only 4s and many times 3s is plenty powerful enough.
ET48 2.2 1/8th 4WD Competition Electric Truggy Kit list price was for kit new was: $729.99
https://www.teknorc.com/shop/tkr9605-et48-2-2-1-8th-4wd-competition-electric-truggy-kit/
Firma 150A Brushless Smart ESC / 2050Kv Sensorless Motor Combo list price was for kit new cost: $220.99
https://www.horizonhobby.com/produc...2050kv-sensorless-motor-combo/SPMXSEMC05.html
DBOOTS BACKFLIP TIRE SET list price was for kit new was: $27.99
https://www.arrma-rc.com/en/product/dboots-backflip-tire-set-2-pairs/ARA-2991.html
Pro Modeler DS635BLHV purchased new was: $179.99
https://www.promodeler.com/DS635BLHV
TQi 4-Ch 2.4 GHz transmitter + TQ receiver was: $100
https://traxxas.com/6509a-2-ch-tqi-24-ghz-transmitter-with-tsm-receiver
FRAME PROTECTION (RPM bumper + rear skid plate + transparent frame protector) from RC Excitement was: $70
Custom made 3d printed body protector/reinforcement and custom aluminum shock tower protectors
Everything on this car is in great working order and has been regularly maintained.
For an extra $35, I can add an SMC 5800 MaH LIHV 4s 15.2V battery.
We are looking to sell this locally if possible. I will check back here daily. If you have any questions then please feel free to ask. Below are pictures of the car my son took this past weekend. Please keep in mind that there is a heavy clear chassis protection film attached to 100% of the bottom of this car aluminum chassis + the rear skid plate + the front bumper with skid plate so the scratches in the picture are mostly all on the film or protection plates and not the actual aluminum chassis. If you remove the protection film there will be almost no scratches. you are getting A ready to run race car set up with above average protection, a top line Pro-Modeler servo, and a very good 2050 kv motor and 150 amp ESC.
Thanks, John
Other relevant threads with pictures of this car and other Tekno cars yet to be listed. https://www.rctalk.com/forum/threads/my-losi-lmt-build-modification-thread.134536/#post-1510145
My son made a list of the most important parts included in the sale of the car below. He is asking for $750 for the kit including shipping (lower 48) and for an extra $35, I can add an SMC 5800 MaH LIHV 4s 15.2V battery. Note, this car could be run on 6s but we HIGHLY recommend that you NEVER do that. We have never run it on 6s, only 4s and many times 3s is plenty powerful enough.
ET48 2.2 1/8th 4WD Competition Electric Truggy Kit list price was for kit new was: $729.99
https://www.teknorc.com/shop/tkr9605-et48-2-2-1-8th-4wd-competition-electric-truggy-kit/
Firma 150A Brushless Smart ESC / 2050Kv Sensorless Motor Combo list price was for kit new cost: $220.99
https://www.horizonhobby.com/produc...2050kv-sensorless-motor-combo/SPMXSEMC05.html
DBOOTS BACKFLIP TIRE SET list price was for kit new was: $27.99
https://www.arrma-rc.com/en/product/dboots-backflip-tire-set-2-pairs/ARA-2991.html
Pro Modeler DS635BLHV purchased new was: $179.99
https://www.promodeler.com/DS635BLHV
TQi 4-Ch 2.4 GHz transmitter + TQ receiver was: $100
https://traxxas.com/6509a-2-ch-tqi-24-ghz-transmitter-with-tsm-receiver
FRAME PROTECTION (RPM bumper + rear skid plate + transparent frame protector) from RC Excitement was: $70
Custom made 3d printed body protector/reinforcement and custom aluminum shock tower protectors
Everything on this car is in great working order and has been regularly maintained.
For an extra $35, I can add an SMC 5800 MaH LIHV 4s 15.2V battery.
We are looking to sell this locally if possible. I will check back here daily. If you have any questions then please feel free to ask. Below are pictures of the car my son took this past weekend. Please keep in mind that there is a heavy clear chassis protection film attached to 100% of the bottom of this car aluminum chassis + the rear skid plate + the front bumper with skid plate so the scratches in the picture are mostly all on the film or protection plates and not the actual aluminum chassis. If you remove the protection film there will be almost no scratches. you are getting A ready to run race car set up with above average protection, a top line Pro-Modeler servo, and a very good 2050 kv motor and 150 amp ESC.
Thanks, John
Last edited: