• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

ET48 2.0 - M2C shock towers - yes or no?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

KitsAreFun

Member
Messages
7
Reaction score
1
Got a used ET48 2.0 that I want to use as basher. My son manged to bend the rear shock tower of an MT410. I am thinking about replacing the shock towers before I drive it.

Should I get the M2C shock towers for my ET48 2.0?
Will the body still fit with the M2C shock towers?
 
The stock towers on the ET 2.0 are massive. I wouldn’t touch them.

The real weak points are the 4 x screws attaching the tower to the gear box. Which was fixed by m2c on the MT410 with the following tower brace.

To your question: I would not touch the ET towers. But I also would not expect the ET to become the basher MT410 is.
 
I wouldnt bother to replace them until you need to, you may never bend them if you drive better and don't land on the towers. if you do then i'd say go for the upgraded towers then. you dont need to save weight for bashing.
 

Recent Popular Liked

Back
Top