Its time to let go of my ET410.2. No tracks around me near enough to race and don't quite have enough time to bash this thing. It's in great condition, built it and ran it at a track to practice once and a couple times around the neighborhood. Literally less than 10 packs ran through.
As a base roller, I'll include the following:
For another $100 I'll throw in all of the below as well:
Let me know if you have any questions.
Thanks.
As a base roller, I'll include the following:
- ET410 Roller: most hardware is stainless, carbon plate mods, oils are stock weight, and a bunch of spare parts
- Will come with the DE wheels wrapped in holeshots, basically new as pictured, vent holes are covered with waterproof mesh, blue aluminum wheel nuts
- (2) extra holeshots tires and foams (New)
- (2) bodies, 1 is new. The other is in great condition, no rips or anything, just dirty
- (2) wing with (2) center stabilizers, 1 is new. The other is in great condition, no rips or anything, just dirty
For another $100 I'll throw in all of the below as well:
- (2) CHNL 2S Packs, 5200MAH, ran less than (10) times total, at
- balance voltage and stored in fridge
- Hobbywing XeRun 90A V2.1 ESC with 1UP Heatsink bullet plugs, aluminum fan, and Usukami Aluminum fan cover/protector (sensored, brushless)
- Castle Creations 5700kV Sensored Motor with bullet plugs soldered
- Proline Raid wheels wrapped in Bonesaw tires 2.8" perfect for just messing around, nearly new, just a bit dirty
Let me know if you have any questions.
Thanks.