Differential outdrive pins

[securtis12]

Was assembling my new sct410.3 kit and lost an outdrive pin. Can anyone tell me the dimensions? I do not see it broke out in the parts list.
Thanks

 

[Billl DeLong]

How about measuring the other pin?

I'll be happy to measure mine the next time I rebuild it, but probably won't be for another week before it's time for me to rebuild.

If I had to guess, it's probably 2.0 x 9.8mm which is the pin for the CVD rebuild, but I'm not 100% certain that they used the same pins.

https://www.teknorc.com/shop/tkr6856-m6-cv-rebuild-kit-for-6851x-6852x-1951x-2210x-others/

 

[securtis12]

Best I can tell with my micrometer it is 2x5mm just slightly larger diameter than cvd and shorter. They measured around 1.8 diameter

 

[Billl DeLong]

Just to confirm, you need a 2.5x9.8mm pin?


If so, that's the length of the pins here from RC Renew, I've been using these pins on my 1/10 drive shafts for a while now with really good results:
https://www.rcrenew.com/tools.html

More info here:

• Pin Replacement Tools

 

[securtis12]

Best I can tell with my micrometer it is 2x10mm just slightly larger diameter than cvd and shorter. They measured around 1.8 diameter

 

[Billl DeLong]

The 2.0mm pins from RC Renew are also 9.8mm long as well

 

[Billl DeLong]

So I just happened to go through my spare parts bin and found bag for TKR5614X:
https://www.teknorc.com/shop/tkr561...rontcenterrear-hardened-steel-lightened-2pcs/

Anyway this part comes with the pins for the diff gear and I verified that the pins are 2.5 x 9.8mm which are also the same length as the pins I linked to RCRenew earlier.