Thanks! That brings it line with other bodies i've seen. Might need some trimming the the front/rear bumpers and the wheel arches. How close is the fit to the side skirts, new Tekno's are wider than the .3 cars, but still narrow.
-
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
MT48 2.0 Body Ideas
- Thread starter Acontisr
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
Redacted
Member
I'm running 4s Copperheads. It looks like even if you take into account some ballooning that trimming wouldn't be necessary. Maybe some on the bumpers to accommodate shocks, but the wheel arches should be good.
Nearly a perfect fit then?
What body posts are you using to fit the thick basher bodies?
I tried the Arrma Big Rock ones squared off to fit in the Tekno body mounts, but it broke in one sesh. Also tried the JS Parts 3D printed body posts, but they also broke in one sesh (too flexible and not durable
I tried the Arrma Big Rock ones squared off to fit in the Tekno body mounts, but it broke in one sesh. Also tried the JS Parts 3D printed body posts, but they also broke in one sesh (too flexible and not durable
Hello, I hope I’m posting in the right place.
I was wondering if a truggy body, for example the ET48 body, could fit on the MT48?
I’d like to use my MT48 on the track as well with truggy tires (to avoid needing multiple cars), and it would also make it a bit more discreet on the track
Has anyone already tried running a truggy body on the MT48?
Thanks in advance!
I was wondering if a truggy body, for example the ET48 body, could fit on the MT48?
I’d like to use my MT48 on the track as well with truggy tires (to avoid needing multiple cars), and it would also make it a bit more discreet on the track
Has anyone already tried running a truggy body on the MT48?
Thanks in advance!
I’ve seen the J Concepts truggy Finisher body on the Kraton 1/8. It might fit on the MT48 2.0.Hello, I hope I’m posting in the right place.
I was wondering if a truggy body, for example the ET48 body, could fit on the MT48?
I’d like to use my MT48 on the track as well with truggy tires (to avoid needing multiple cars), and it would also make it a bit more discreet on the track
Has anyone already tried running a truggy body on the MT48?
Thanks in advance!
Thanks, I bought the Leadfinger Racing Tekno ET48 2.0 Patriot 1/8 Truck Body yesterday. I picked a truggy body somewhat at random, so I’ll let you know if it works.
https://www.amainhobbies.com/leadfi...EK7xYgm8ESr29mmI34tdBNxsRvS4Hx1RoCl44QAvD_BwE
It looks like it will fit. Are you adding a wing?
No, I didn’t buy a wing, but I’m hesitating because I’m not really sure about the advantages and disadvantages. I want to use the same car for both bashing and track driving this summer, and with that in mind I’m not sure if adding a wing is a good idea?
If you're planning to race competitively, the wing would give your rig added stability through the turns and in the air. But for regular track bashing, it is not really necessary.
It was a Japanese video with this body with truggy tires on racing track..What colour is that? Looks like a sunburst orange to me, very nice!
Similar threads
