ADU Racing firing up the CNC for the MT!!!

[RCFinger]

As hoped, ADU Racing has started producing bits for the MT48 2.0!
One of which is this rather tasty looking motor/diff mount + Fan mount! in 7075 with clear viewing windows!!
The thing looks Badboy!!

 

[Acontisr]

Put that on my list. Keep us posted .

 

[RCFinger]

Put that on my list. Keep us posted .

Will do!
Also saw this...

 

[Leonoff.A]

But they began not from very important thing I wrote to them, they sad that planning many tuning ass bulkheads and braces... waiting

 

[Leonoff.A]

Yo eeee

 

[HulkRC]

This is good news! I have ADU parts on my Asuga. Do these blocks fit the kit 5mm hinge pins?

 

[Leonoff.A]

This is good news! I have ADU parts on my Asuga. Do these blocks fit the kit 5mm hinge pins?

Yes, it's for stock mt48

 

[HulkRC]

Yes, it's for stock mt48

Excellent! And probably cheaper and more durable than Tekno parts.

 

[Leonoff.A]

I don't think it's more durable than tekno aluminium parts butis cheaper than get truggy blocks with 4mm pins, and its 100pro more durable than tekno new abcd blocks

 

[RCFinger]

I think they will be more durable, purely due to being designed for the 5mm pins without and need to mod. Mine are on the way so we shall see...

 

[RC-Steve]

I got a set of hinge pin retainers on route. I break a stock A block every other battery pack. The flaw is a giant 4mm hole in the center of the block. We'll see if the ADU blocks hold up any better.

I also have a set of the Arrma gears on order too. My Kraton has a Hobbywing 4990 G2 diff eating motor in it. The gear is only half the problem. I've broken a lot of cross pins. There's more than the pin going on. My Sledge uses the same diameter cross pins on 8s and I have never broken one.?

 

[Leonoff.A]

Tekno have no problems with diffs and pins... if you don't use stock plastic pins and cheap diffcase from mt48.. you need normal diffcases and metall pins from et48 2.0 or 2.2

 

[HulkRC]

I got a set of hinge pin retainers on route. I break a stock A block every other battery pack. The flaw is a giant 4mm hole in the center of the block. We'll see if the ADU blocks hold up any better.

I also have a set of the Arrma gears on order too. My Kraton has a Hobbywing 4990 G2 diff eating motor in it. The gear is only half the problem. I've broken a lot of cross pins. There's more than the pin going on. My Sledge uses the same diameter cross pins on 8s and I have never broken one.?

Let us know how the fitment is. Another thread indicated that the 5mm hinge pins were difficult to install and the holes in the blocks should have been angled.

 

[RC-Steve]

Let us know how the fitment is. Another thread indicated that the 5mm hinge pins were difficult to install and the holes in the blocks should have been angled.

It's coming from China, early November, possibly.

 

[RCFinger]

I have the ADU blocks fitted and tested. They are strong to the point i no longer worry about them like the Tekno ones. The rears (C/D) are a pain to fit though.

 

[RustyUs]

I got a set of hinge pin retainers on route. I break a stock A block every other battery pack. The flaw is a giant 4mm hole in the center of the block. We'll see if the ADU blocks hold up any better.

I also have a set of the Arrma gears on order too. My Kraton has a Hobbywing 4990 G2 diff eating motor in it. The gear is only half the problem. I've broken a lot of cross pins. There's more than the pin going on. My Sledge uses the same diameter cross pins on 8s and I have never broken one.?

I'm assuming this is the common breakage area...

 

[HulkRC]

I'm assuming this is the common breakage area...
View attachment 11513

A block is a common breakage. Adu has upgraded A-D blocks.

 

[RC-Steve]

I'm assuming this is the common breakage area...

Yep, then the plastic tab that goes under the gearbox pulls out.

I have a new set sitting on the table right now waiting for me to get around to installing a new A block. Yep, the MT48 is down again with a broken A block. I'm really hoping the ADUs solve the problem.

 

[HulkRC]

If ADU is listening, I hope you guys fix the C and D blocks pin holes for better fitment before I buy your blocks.

 

[RC-Steve]

I finally got around to replacing my A block. This is the old one.