• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

48 2.0 Working on the build. Got a steering servo question.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

PapawFox64

Member
Messages
12
Reaction score
0
I’ve got a Savox steering servo with a 25T spline. A single sided horn should be ok but what about the length? For setup, should I use the 18mm or 20mm hole from center mounting hole? Thanks for any input.
 
Usually 18 mm
Tekno R/C strongly recommends using the inside (short) mounting hole for use in Tekno RC vehicles. This will make the steering response smoother and also protect your servo better.
 
Usually 18 mm
Tekno R/C strongly recommends using the inside (short) mounting hole for use in Tekno RC vehicles. This will make the steering response smoother and also protect your servo better.
Thanks!👍🏻
 

Recent Popular Liked

Back
Top