• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

For Sale Tekno/Arrma CVD Driveshaft kits

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
I have the retainer rings in stock.
https://www.ebay.com/itm/173960669303

Arrma 5mm steel CVD Driveshaft kits for the Tekno ET48.3 and MT410! The full kit will include everything shown below and is 100% bolt-on. Everything in this kit has been thoroughly tested for months. Each part has been selected for a quality fitment and function. I would recommend using the updated TKR8727 shock standoffs on the front, they are slightly longer which will give you more clearance from the driveshaft rubbing on the spring.

These are the Arrma part numbers used, in both a set or individually. They are used only on the front of the Talion, the rears are not CVD’s. The Kraton/Outcast use different stub axles than the Talion but the driveshafts are the same.

AR220031, Driveshaft & Stub Axle
AR310458, Driveshaft
AR310487, Stub Axle
AR310452, Barrell & Pin

These are the rest of the parts used.

600223, Serpent Wheel Hex
110212, Serpent Pin 2.5x17mm
Custom Steel Ring (Please contact me if you need some)
Steel Shim 8x14x2mm (A small percentage need a 1.5mm thick shim)
Knurled Set Screw M5x5mm



SOLD OUT
The full kit is $120 shipped.

View attachment 1501

This is the partial kit and includes everything needed for installation, minus the Arrma driveshaft and stub axle.

SOLD OUT
The partial kit is $45 shipped.

View attachment 1502

View attachment 1508

View attachment 1503

View attachment 1504

View attachment 1505

View attachment 1506

View attachment 1507

View attachment 1509
How can I get my hands on this kit? I’m going all out and want to build this mt410 right for bashing
 
All of the parts are readily available online except the retainer rings which I sell.
 
All of the parts are readily available online except the retainer rings which I sell.
I am having a hard time tracking down the shims, can you share where you sourced those? Thank you.
 
Would like to know if your going to be selling the full kits again. If not would like the info on purchasing the retainer rings. Thanks and awesome mod!
 
I am having a hard time tracking down the shims, can you share where you sourced those? Thank you.
The shims are available from McMaster, get both.

8x14x2
98089A441

8x14x1.5
98089A119

@Overkill

Will you be getting these kits back in stock anytime soon?
I only sell the retainer rings.

Would like to know if your going to be selling the full kits again. If not would like the info on purchasing the retainer rings. Thanks and awesome mod!
I only sell the retainer rings. I’m out of stock right now but will have more later this week.
 
Anyone know how to get these rings? I've reached out to Overkill but haven't gotten a reply. Thanks!
 
I've got two MT410s, and I've done this mod with good success on one of them. Wondering though, are the m2c cvd shafts a better/cheaper solution?
 

Recent Popular Liked

Back
Top