• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

My new MT410, finally!

JamieG

Member
Messages
13
Reaction score
11
Location
Perth, Western Australia
Tekno RC's
  1. MT410
Hi Guys,

Finally the MT410 is built, it’s taken me months due to time constraints, family life etc etc.. but finally finished the body last week and took it out for a test run yesterday, well, feck me this thing is like a bat out of hell, I even (unintentionally) back flipped it as well as landing on all 4 wheels 😃(something I’ve never done before). The long wait was definitely worth it. Obviously there will be some more tweeks a long the way but first impressions did not disappoint. Thanks guys for some of your help also a long the way with my rookie questions! Now, lets start bashing. 😊

8861CF51-8521-484B-95D7-1A72339CBD34.jpeg
 

Attachments

  • 35F9B929-ADD2-457E-9E20-EEE91CB39355.jpeg
    35F9B929-ADD2-457E-9E20-EEE91CB39355.jpeg
    136.3 KB · Views: 47
  • CADB273F-897E-4F02-8A2F-01820DB72B20.jpeg
    CADB273F-897E-4F02-8A2F-01820DB72B20.jpeg
    152.8 KB · Views: 50

Andy McNab

Member
Messages
14
Reaction score
12
Tekno RC's
  1. EB410
Hi Guys,

Finally the MT410 is built, it’s taken me months due to time constraints, family life etc etc.. but finally finished the body last week and took it out for a test run yesterday, well, feck me this thing is like a bat out of hell, I even (unintentionally) back flipped it as well as landing on all 4 wheels 😃(something I’ve never done before). The long wait was definitely worth it. Obviously there will be some more tweeks a long the way but first impressions did not disappoint. Thanks guys for some of your help also a long the way with my rookie questions! Now, lets start bashing. 😊

View attachment 8776
Looking good, nice in that colour especially with the restraint of not using the entire decal sheet
 

Ruzty1311

Member
Messages
23
Reaction score
9
Looks good man! If you haven't been told already, that body tends to crack at the body mounts in the rear. Now it probably depends on how hard you bash, but they will eventually start pulling through the cracks rendering the body useless haha So try to find some thin plastic washers or reinforce it underneath where they mount somehow without sacrificing pin mounting capabilities :)
 

JamieG

Member
Messages
13
Reaction score
11
Location
Perth, Western Australia
Tekno RC's
  1. MT410
Looks good man! If you haven't been told already, that body tends to crack at the body mounts in the rear. Now it probably depends on how hard you bash, but they will eventually start pulling through the cracks rendering the body useless haha So try to find some thin plastic washers or reinforce it underneath where they mount somehow without sacrificing pin mounting capabilities :)
Wow thanks for letting me know about that, very useful tip! And at least now I can do that before my nice new body becomes useless, boo hoo.
 

Rhino

New member
Messages
4
Reaction score
1
Hi Guys,

Finally the MT410 is built, it’s taken me months due to time constraints, family life etc etc.. but finally finished the body last week and took it out for a test run yesterday, well, feck me this thing is like a bat out of hell, I even (unintentionally) back flipped it as well as landing on all 4 wheels 😃(something I’ve never done before). The long wait was definitely worth it. Obviously there will be some more tweeks a long the way but first impressions did not disappoint. Thanks guys for some of your help also a long the way with my rookie questions! Now, lets start bashing. 😊

View attachment 8776
that's a thing awesomeness!!!
 

Rhino

New member
Messages
4
Reaction score
1
I just finished mine lastweek..
 

Attachments

  • 20220901_175445.jpg
    20220901_175445.jpg
    120.6 KB · Views: 43
  • 20220901_175506.jpg
    20220901_175506.jpg
    106.9 KB · Views: 42
  • 20220901_175550.jpg
    20220901_175550.jpg
    144.4 KB · Views: 42

Recent Popular Liked

Top