• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

My ET48.3 switched from 4S to 6S

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Looping67

Member
Messages
12
Reaction score
15
Hi.
My 4S lipos were starting to get tired. I have WSline 4S 8000/100c. As I'm not racing or just on challenges where there is no battery requirements i decided to go on 6S. I bought my lipos 2nd hand with very few charges(i have 5 of them) and they are quite expensive new(around 110€) so i went with new WSline 6S 5000/75c which are cheaper(90€) and changed my WSline 4274 2000kv to a Rocket Taurus 4274 1500kv. So now i'm with a 6S/1500kv/16t/5000mah instead of 4S/2000kv/17t/8000mah.
Just a little test done to check everything had been correctly soldered. It should be 6 or 8km/h faster and i expect same runtime or more. There are an little less w/h in the 6s/5000 pack compared to the 4s/8000 but it should run cooler so we'll see. Rock on!🤟
 

Attachments

  • 20220523_175442.jpg
    20220523_175442.jpg
    122.2 KB · Views: 116
  • 20220523_175423.jpg
    20220523_175423.jpg
    108.4 KB · Views: 116

Recent Popular Liked

Back
Top