DSMMOTORSPORTS
Well-known member
I have a well over budget build Tekno MT410 / ET48.3 I'm testing the waters this a lightly used setup im looking at most reasonable offers i don't have to sell it but I'm looking to help out my son he is need of some vehicle repairs that is out of my price range at the moment I built this truggy over a corse of about 7 months I have upgraded and built proof this set up there is nothing needed at all please ask questions .
There is over 3k with electronics invested
In this build
M2C ET 48.3 WIDE Chassis meaga brace
M2C braces,chassis,and shock tower
M2C shock bushings, shock caps,6 hole piston ,
M2C Front and Rear hinge pin braces
M2C front , center , rear differential cups
M2C 25T Long servo horn
TEKIN 1550KV
TEKIN RX8
SAVOX BLACK PERFORMANCE ALUMINUM SERVO
I HAVE 2 NEW SMC 6S 8000mah battery packs
Acer Ceramic bearings
Motoworx custom 3.8 beadlocks
Dboots back-flip LP
Arrma GPM 6MM AXLES
LUNSFORD TITANIUM TURNBUCKLES
EXOTEK ALUMINUM STEERING
ALL RACING FRONT STEERING SUPPORT PLATE
FRONT AND REAR T BONE RACING BUMPERS
AXLES AND KNUCKLES ARE ALL SHIM PROPERLY SO THERE ARE NO PLAY ALL BEARINGS HAVE BEEN GREASED WITH A HI TEMP WATER RESISTANT
I HAVE TONS OF EXTRA PARTS AND NEW SET OF TIRES .
I KNOW IM MISSING SOME STUFF BUT JUST ASK ME I CAN TELL YOU ANYTHING YOU NEED TO KNOW
SERIOUS BUYERS ONLY I NOT GOING TO DUMP BUT I WILL CONSIDER REASONABLE OFFERS YOU WILL NOT BE ABLE TO BUILD THIS FOR THE GOING PRICE. I WILL NOT TAKE LESS THAN 2K
There will be all extra parts to go with it
There is over 3k with electronics invested
In this build
M2C ET 48.3 WIDE Chassis meaga brace
M2C braces,chassis,and shock tower
M2C shock bushings, shock caps,6 hole piston ,
M2C Front and Rear hinge pin braces
M2C front , center , rear differential cups
M2C 25T Long servo horn
TEKIN 1550KV
TEKIN RX8
SAVOX BLACK PERFORMANCE ALUMINUM SERVO
I HAVE 2 NEW SMC 6S 8000mah battery packs
Acer Ceramic bearings
Motoworx custom 3.8 beadlocks
Dboots back-flip LP
Arrma GPM 6MM AXLES
LUNSFORD TITANIUM TURNBUCKLES
EXOTEK ALUMINUM STEERING
ALL RACING FRONT STEERING SUPPORT PLATE
FRONT AND REAR T BONE RACING BUMPERS
AXLES AND KNUCKLES ARE ALL SHIM PROPERLY SO THERE ARE NO PLAY ALL BEARINGS HAVE BEEN GREASED WITH A HI TEMP WATER RESISTANT
I HAVE TONS OF EXTRA PARTS AND NEW SET OF TIRES .
I KNOW IM MISSING SOME STUFF BUT JUST ASK ME I CAN TELL YOU ANYTHING YOU NEED TO KNOW
SERIOUS BUYERS ONLY I NOT GOING TO DUMP BUT I WILL CONSIDER REASONABLE OFFERS YOU WILL NOT BE ABLE TO BUILD THIS FOR THE GOING PRICE. I WILL NOT TAKE LESS THAN 2K
There will be all extra parts to go with it
