• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

MT410 build

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Messages
56
Reaction score
49
Location
Netherlands
Tekno RC's
  1. MT410
Driving Style
Basher
This is the first build I'm going to start. Let's try to post some pictures with my progress.

Right now I only organised the bags, lol
15756466771316046774404779656078.jpg
 
It's too clean. You should get some dust and dirt on that pronto!
 
Again a few steps further, parts are mounted on the chassis:
20191212_195231.jpg


Next are the shocks ( including the optional cartridge caps TKR6015 and shock caps TKR8702 )

Only thing is there is one plastic ring left ( the one that goes between the 2 orange rubber o-rings, part no TKR6008 ) Is that correct?
 
Rear shocks are mounted too and servo is installed. I'm now trying to figure out which motor and ESC I'm going to choose, probably Arrma 2050kv with Max8:
1576612900737989923866427753080.jpg


Just got a nice body as birthday present, a proline Ford Raptor F-150:
15766127375321327133179290525524.jpg
 
I had that system. I switched to a mmx/sensored 2200kv on 4s. Absolutely love it! Nice job on the build ?
 
I had that system. I switched to a mmx/sensored 2200kv on 4s. Absolutely love it! Nice job on the build ?

Thanks!!
These were the parts I had laying around. 2200kv will be my next motor.

This is my current progress, 2050kv motor and MAX8 esc installed. With a 20t pinion ? just for testing purposes, I think it's going to run too hot and I'll have to gear down later.

20191220_194504.jpg


20191220_204903.jpg
 

Recent Popular Liked

Back
Top