• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

MT410 2.0 upgrades?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Boon

New member
Messages
4
Reaction score
1
Hi all, wondering if there are any upgrades available for the MT410 2.0?. I have Gpm 7075 shock caps, hardened steel Spur and T2T brace fitted also the sct motor mount fitted to allow me to fit bigger Pinions. Shame none of the companies like M2c or CRCU, Scorched are not building 7075 shock towers. TIA
 
Hi all, wondering if there are any upgrades available for the MT410 2.0?. I have Gpm 7075 shock caps, hardened steel Spur and T2T brace fitted also the sct motor mount fitted to allow me to fit bigger Pinions. Shame none of the companies like M2c or CRCU, Scorched are not building 7075 shock towers. TIA
The stock towers are 7075 btw. They're only 4mm thick versus our machined race towers which are 5mm, but we found that they help up extremely well with the tower to bulkhead brace.
 
The stock towers are 7075 btw. They're only 4mm thick versus our machined race towers which are 5mm, but we found that they help up extremely well with the tower to bulkhead brace.
Thanks, I am just use to adding some bling to my Rc's 👍🏻
 
The stock towers are 7075 btw. They're only 4mm thick versus our machined race towers which are 5mm, but we found that they help up extremely well with the tower to bulkhead brace.
Thanks, I am just use to adding some bling to my Rc's
GPM makes other bling also. Hubs, tie rods, diif case, etc... and an upper brace that actually fits
I have Gpm Alu Shock caps and hardened steel Spur, T2T brace fitted, pleasantly impressed with the quality of GPM parts are now, go back 8/10 years and it was very poor quality.
 
Back
Top