• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

Heads up to Tekno - consider adding a note to instructions.

freelosophy

Well-known member
Messages
196
Reaction score
82
On the EB410.2 instructions, Page 7 (Bag E). The youtube video clarifies the concern, but the instructions are unclear where the thin .5 mm chims go vs. the thicker 1mm. They both have the same part number since they come on the same plastic with inserts, etc. The manual should have a note that indicate thin vs thicker shims to make it clear without having to refer to the youtube video. Regardless, am loving putting together this kit. Am trying to go real slow and enjoy every perfectly fitting part and while building it. Not sure why rtr are so popular, some people are missing out on a really gratifying experience building this kit.
 

Attachments

  • 20211031_133553.png
    20211031_133553.png
    915.8 KB · Views: 53

Matthew_Armeni

Tekno RC Staff
Tekno RC Staff
Messages
131
Reaction score
196
There's a little inset graphic on that page (upper right of your pic) that says the thin shims are .5mm and the thick are 1mm. It says to have 1mm worth of shims on the front of the arm and put 1mm worth of shims on the rear.
 

Mustang76

Member
Messages
10
Reaction score
2
It says clearly in the manual what shims go where, I just put one together by the book
 

Recent Popular Liked

Top