- Thread starter
- #21
The 5mm bullets with the heat sink are 1up Racing and I fitted the braidingLooking nice ! What are those battery connectors and braided wires you are using?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
The 5mm bullets with the heat sink are 1up Racing and I fitted the braidingLooking nice ! What are those battery connectors and braided wires you are using?
I was thinking of ordering a set of orings that are slightly thinner, but I have assembled two full sets of these shocks now, they seem to loosen up ever so slightly after being wound up and down a few times. I used some white grease on mine the second time and they went on much easier, they were still really tight, but the threads started without any trouble. Once I'd would them up all the way I cleaned the shock collars with Shellite (Naphtha).Really enjoyable build so far (apart from shock collars )
Front & rear bulkheads built
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the best Tekno RC community for RC enthusiasts that covers all aspects of the Tekno RC brand!
Register Today It's free! This box will disappear once registered!