• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

For Sale Custom Build Service

Billl DeLong

Well-known member
TF Excellence Award
Supporting Member
Build Thread Contributor
Messages
776
Reaction score
639
Location
Austin, TX
Tekno RC's
  1. EB410
  2. EB48
  3. ET48
  4. ET410
  5. MT410
  6. SCT410
Driving Style
Racer
$40 Labor to assemble any kit (on a setup station to any setup you want)+ shipping

  • Option 1) You ship me everything you want assembled, once build is complete I will pack and invoice you for labor and return shipping expenses
  • Option 2) You give me a complete list of everything you want, or let me pre-select recommended items for your build to make sure you have everything you need, then I invoice you up front via PayPal with an itemized list of everything to be assembled in the build.
 
Last edited:

Billl DeLong

Well-known member
TF Excellence Award
Supporting Member
Build Thread Contributor
Messages
776
Reaction score
639
Location
Austin, TX
Tekno RC's
  1. EB410
  2. EB48
  3. ET48
  4. ET410
  5. MT410
  6. SCT410
Driving Style
Racer
Here is a sample "Ready to Race" build I recently did where I optionally offer to paint (rattle-can) a single color included in the labor charge:
Total invoiced - $1,020.24

Click each image for full size pic:





*** Buyer requested waterproof radio box, so I sealed with silicone:



*** Excess wiring shortened:

 
Last edited:

Sludog

Well-known member
Messages
180
Reaction score
132
Location
LBI
Tekno RC's
  1. EB410
  2. MT410
Driving Style
Basher
How about soldering service rate? Ship a motor and esc to you for new wires and connectors ready to go.
 

Billl DeLong

Well-known member
TF Excellence Award
Supporting Member
Build Thread Contributor
Messages
776
Reaction score
639
Location
Austin, TX
Tekno RC's
  1. EB410
  2. EB48
  3. ET48
  4. ET410
  5. MT410
  6. SCT410
Driving Style
Racer
How about soldering service rate? Ship a motor and esc to you for new wires and connectors ready to go.

I can do that for $8 Labor + return shipping costs, invoiced when ready to ship back.

I would recommend that you install the electronics in your car first, then snap a pic of the orientation of the ESC/Motor in place, trim the wires to proper length so I can see how they need to be soldered and that may work nicely :)
 

Billl DeLong

Well-known member
TF Excellence Award
Supporting Member
Build Thread Contributor
Messages
776
Reaction score
639
Location
Austin, TX
Tekno RC's
  1. EB410
  2. EB48
  3. ET48
  4. ET410
  5. MT410
  6. SCT410
Driving Style
Racer
Here is a recent "re-build" project that I completed this week, the buyer bought a used MT410 and had it shipped to me (sight unseen), I then made a box opening video and uncovered a myriad if issues that needed to be addressed. This project was definitely way more work than building a kit from scratch, which involved correcting shock cartridge parts installed backwards, steering links installed backwards, stripped aluminum servo gear was sold, missing/mismatched hardware throughout.... it would've likely been a complete nightmare for the buyer to mitigate let alone know what needed to be corrected, but in the end I provided a proper setup along with a demo video of some practice laps with the truck at the local track before shipping it back:




Towards the end of the video I started doing some backflips on the jumps as I got more comfortable behind the controls, this was my very first time driving the MT410!
 

Nicochau

Well-known member
Messages
433
Reaction score
305
Location
Los Angeles
Tekno RC's
  1. EB48
  2. ET48
  3. MT410
Driving Style
Basher
If I didn’t that much enjoy working on my stuff I would most definitely use Bill’s service. 😆

💯💯💯 trust his skills, experience and willingness to help fellow hobbyists.

@Billl DeLong , regards to the MT410, I’m with you on the additional work. Buying used and restoring an RC is a work of patience!
 

Trey410

Member
Messages
6
Reaction score
1
I am so down on working on a build I want a Tekno ET410.2 race ready for a smack down
 

Trey410

Member
Messages
6
Reaction score
1
I ordered the Kit on Saturday, I have not got any type of response from you so I guess I will move on. This is a strange site or something is wrong as I can’t get a response on the forum for the life of me.
 

Nicochau

Well-known member
Messages
433
Reaction score
305
Location
Los Angeles
Tekno RC's
  1. EB48
  2. ET48
  3. MT410
Driving Style
Basher
I ordered the Kit on Saturday, I have not got any type of response from you so I guess I will move on. This is a strange site or something is wrong as I can’t get a response on the forum for the life of me.
You need to use the reply button or tag (@Trey410 ) members so they get notified. Bill is very responsive and amazingly competent member.
 

Billl DeLong

Well-known member
TF Excellence Award
Supporting Member
Build Thread Contributor
Messages
776
Reaction score
639
Location
Austin, TX
Tekno RC's
  1. EB410
  2. EB48
  3. ET48
  4. ET410
  5. MT410
  6. SCT410
Driving Style
Racer
You need to use the reply button or tag (@Trey410 ) members so they get notified. Bill is very responsive and amazingly competent member.
I ordered the Kit on Saturday, I have not got any type of response from you so I guess I will move on. This is a strange site or something is wrong as I can’t get a response on the forum for the life of me.

So I just figured out that I needed to "subscribe" to my own thread, doh!
I just happened to visit this thread for a reference and saw these posts just now!
Hopefully your build went well, if anyone is interested in the build service, please send me a private message to ensure that I get proper notification, thanks :)
 

Recent Popular Liked

Top