• Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.

    Come join our community and ask your questions, show off your Tekno RCs and share your experience!

First build, newbie question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Badlands

New member
Messages
2
Reaction score
0
Almost finished with 410.3 kit. I thought I installed the 11 tooth pinion correctly but the teeth aren’t making contact with the differential, even though the 5212 seems to be bottomed out. This is clearly my mistake - I haven’t had luck searching this forum for the solution. Ideas? Thank you
 
Do you have the center brace installed? If so, remove it and the 11t pinion may fit. I'm 99% sure a 12t will fit with the center brace removed, but I haven't run a pinion that small in a long time.
 
Thank you. I should have known sand asked before purchasing. even though I have seen postings of different motor/pinion combinations the manual said “tkr4171-4190” which pulled up an 11 on the tekno site. I wish the instructions said “find an appropriate pinion size” rather than give a specific part number
 
Almost finished with 410.3 kit. I thought I installed the 11 tooth pinion correctly but the teeth aren’t making contact with the differential, even though the 5212 seems to be bottomed out. This is clearly my mistake - I haven’t had luck searching this forum for the solution. Ideas? Thank you
What motor is the "5212"?
 
5212 is the motor mount
 

Recent Popular Liked

Back
Top