Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Welcome to Tekno RC Forums! Are you a Tekno RC fan? If so you're in luck as you've have arrived to the biggest and best Tekno RC community.
Come join our community and ask your questions, show off your Tekno RCs and share your experience!
Just click on his avatar and select “start conversation”I have a MT410 I would like to do the Arrma 5mm cvd drive shaft mod I need a set of your custom retainer rings.Are they totally necessary? if so I would like to buy set Thanks I appreciate it. You told me to message you I’m not sure how to do that I hope this is OK
it's stock, Driveshaft & Stub Axle from the LST XXL 2. The driveshaft is 142,5 mm. the stub axle is 44mm. the LST stub axle is a little longer than the Tekno stub and the driveshaft is a bit shorter but happens to fit perfect anyway ?!Cool, what's the pin to pin measurement and which stub axles are you using with them?
I put my old LST XXL 2, 5mm cvd's on my Tekno 410, had to be a little creative with some extra shims, but came out perfect..
I have the retainer rings in stock.
https://www.ebay.com/itm/173960669303
I have the retainer rings in stock.
https://www.ebay.com/itm/173960669303
Register and gain access to Discussions, Reviews, Tech Tips, How to Articles, and much more - on the best Tekno RC community for RC enthusiasts that covers all aspects of the Tekno RC brand!
Register Today It's free! This box will disappear once registered!